Magnolia Reinforced Heavy-Duty Polycarbonate Greenhouse

The Magnolia Reinforced Greenhouse is a heavy-duty polycarbonate greenhouse designed for year-round growing. Its galvanized steel frame, reinforced arches, straight sidewalls and twin-wall polycarbonate provide strength, durability and generous growing space for backyard gardeners.

About Magnolia Greenhouse

ABOUT MAGNOLIA

Magnolia is an ideal greenhouse for your garden. The 10 ft width and minimum length of the structure is 6.5 Ft. The frame is made of galvanized metal tubes, the coating is multiwall High Density polycarbonate.
Magnolia is a guarantee of a good harvest, regardless of weather conditions!
Magnolia greenhouse set not only in small areas. If you are beginner gardener, and just try to grow vegetables by yourself, this compact model is perfect for you. You can make 3 garden beds and one convenient passage inside. Experienced gardeners will also find Magnolia application in their garden. As example, in Magnolia you can grow seedlings or plant plants that require special care.

THE BEST SELLER !

MAGNOLIA REINFORCEMENT

New model of GREENHOUSES with 1”x1″ inch pipes, 2.1 ft. arch spacing and additional pipe reinforcements on frame. All the smallest technical details have been thought out and the errors of previous models have been eliminated. According to the index of snow and wind load, it has no analogues in its segment.

Made of riveted, one-piece galvanized on both sides of the pipe, there is no savings on metal – quality does not suffer. Solid construction is easier than ever to assemble with one-piece bent pipes and pre-assembled end pieces.

Important! Unlike most models, Reinforced has holes drilled for attaching longitudinal stringers (rafters). You do not have to waste your time, with a drill in hand, due to manufacturers’ flaws.

The greenhouse is equipped with transverse snow reinforcements of arches, transverse struts, which are located at a height of 2 meters. Used by resourceful gardeners to tie their crops.

The frame is produced without a single welded seam, thereby eliminating the risk of corrosion and oxidation of the seam. At each of the ends, in addition to the transverse ones, diagonal jibs are also installed for even greater reliability of the entire structure.

The greenhouse is equipped with elongated lugs, which is an undoubted plus for the stability of the entire structure. No foundation required – saves you money and time.

Polycarbonate fastening system – galvanized metal strapping tape. Facilitates installation and is the most reliable mounting method. It prevents moisture from entering the inside of the greenhouse and increases the wind load at times. Does not squeeze polycarbonate, unlike self-tapping screws and does not corrode.

The best choice for people who want to buy quality products for decades, while it is good to save money and please themselves with a purchase!

Let’s List Again All The Advantages Of Greenhouse Reinforced:

  • Made of riveted, one-piece galvanized pipe on both sides.
  • The frame is made without a single welded seam, eliminates corrosion.
  • Assembled end pieces – easy assembly.
  • Special silicone washers with a cap at the ends of the greenhouse.
  • Equipped with transverse snow reinforcements of the arches. Which are often used as garters.
  • Polycarbonate fastening system – galvanized metal strapping tape.
  • Holes have been drilled for attaching longitudinal stringers.
  • Extended lugs for each arch.
  • Bolted door hinges without welding seam.
  • There are additional jibs at the ends for the stability of the entire structure.
  • Diagonal door strut.

Heavy-Duty Magnolia Reinforced

DESCRIPTION

Main characteristics of the greenhouse Magnolia:
  • Standard size: 10' × 13' × 7.2' Approximate weight: 290 lb.
  • Greenhouse frame made of square galvanized steel tubes.
  • The galvanized metal frame is assembled with screws and nuts.
  • The height of the installed structure is 7,22 Ft.
  • The greenhouse has a different length (multiple of 6,56 Ft) depending on the selected greenhouse size.
  • Foundation is not required. The greenhouse is secured to the ground using T-shaped ground anchors.
  • Coverage – High quality multiwall polycarbonate sheets manufactured using OMIPA production equipment.
  • Critical snow load is 240 kg/m² (approximately 49 lb/ft²) .
  • Wind Resistance up to 65 mph.
  • Warranty – 3 years.
  • As a basic package is 3 boxes with greenhouse frame Magnolia and two polycarbonate sheets.

To buy the greenhouse Magnolia is to provide the whole family with tasty and organic vegetables!

ASSEMBLY

Installation requires at least 2 people.
Not including site preparation, the assembly should take 1 to 2 days if not on rush.
Necessary tools:

  • Tape measure
  • Screwdriver
  • Gloves
  • Socket set
  • Nut tightening tool for screws
  • Step ladder
  • Level

Maintenance Free !

SHIPPING / FREE LOCAL DELIVERY

FREE LOCAL DELIVERY RADIUS 50ml from our warehouse !

Two options of shipping are available:

WARRANTY

LIMITED WARRANTY

GreenhouseToGrow products are covered by a limited manufacturer warranty against manufacturing and material defects.

Frame: 3-year limited warranty

Polycarbonate: 10-year manufacturer warranty

First 12 months: Full warranty coverage for approved manufacturing or material defects

Months 13–36: Seller and customer share the cost of approved repairs or replacement parts

Customer must provide photos or videos of damaged or defective parts when requested

Freight charges outside a 50-mile service radius are the customer’s responsibility

The warranty does not cover damage caused by improper installation, misuse, corrosion, extreme weather, natural disasters, or loads exceeding the product’s specified snow and wind limits.

For warranty questions, contact: info@greenhousetogrow.com